| Makale Künyesi | Atıf Sayısı | |||||
| M Bilgin, Ş Karabulut, A Özdemir, Investigation of Heat-Assisted Dissimilar Friction Stir Welding of AA7075-T6 Aluminum and AZ31B Magnesium Alloys Arabian Journal for Science and Engineering 45 (2), 1081-1095 | 1 | |||||
| B Yılmaz, Ş Karabulut, A Güllü, A review of the chip breaking methods for continuous chips in turning Journal of Manufacturing Processes 49, 50-69 | 3 | |||||
| H Karakoç, Ş Karabulut, R Çıtak, Study on mechanical and ballistic performances of boron carbide reinforced Al 6061 aluminum alloy produced by powder metallurgy, Composites Part B: Engineering 148, 68-80 | 25 | |||||
| B Yılmaz, Ş Karabulut, A Güllü, Performance analysis of new external chip breaker for efficient machining of Inconel 718 and optimization of the cutting parameters Journal of Manufacturing Processes 32, 553-563 | 37 | |||||
| Ş Karabulut, U Gökmen, H Çinici, Optimization of machining conditions for surface quality in milling AA7039-based metal matrix composites Arabian Journal for Science and Engineering 43 (3), 1071-1082 | 17 | |||||
| AR Motorcu, S Çoşkun, Ş Karabulut, Effects of control factors on operating temperatures of a mechanical heat pump in waste heat recovery: Evaluation using the Taguchi method Vinca Inst Nuclear Sci | 2 | |||||
| Ş Karabulut, H Karakoç, Investigation of surface roughness in the milling of Al7075 and open-cell SiC foam composite and optimization of machining parameters Neural Computing and Applications 28 (2), 313-327 | 25 | |||||
| A Şahinoğlu, Ş Karabulut, A Güllü, Study on spindle vibration and surface finish in turning of Al 7075, Solid State Phenomena 261, 321-327 | 6 | |||||
| Ş Karabulut, H Karakoç, R Çıtak, Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites Composites Part B: Engineering 101, 87-98 | 68 | |||||
| S Karabulut, Study on machining parameters for thrust force and torque in milling aa7039 composites reinforced with al2o3/b4c/sic particles, International Journal of Engineering Technologies 2 (2), 68-75 | 5 | |||||
| Ş Karabulut, U Gökmen, H Cinici, Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O3/B4C/SiC particles Composites Part B: Engineering 93, 43-55 | 61 | |||||
| Ş Karabulut, H Çinici, H Karakoç, Experimental investigation and optimization of cutting force and tool wear in milling Al7075 and open-cell SiC foam composite Arabian Journal for Science and Engineering 41 (5), 1797-1812 | 9 | |||||
| Taguchi method, Ş Karabulut, Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and Measurement 66, 139-149 | 123 | |||||
| A Güllü, Ş Karabulut,, Dynamic chip breaker design for Inconel 718 using positive angle tool holder Materials and Manufacturing Processes 23 (8), 852-857 | 15 | |||||
| Ozakan, M.T., ULAŞ, H.B., BİLGİN, M. Experimental design and artificial neural network model for turning the 50CrV4 (SAE 6150) alloy using coated carbide/cermet cutting tools. Mater. Technol.48, 227–236 (2014) | 10 | |||||
| Ulas, Hasan Basri, Musa Bilgin, Huseyin Kursad Sezer, and Murat Tolga Ozkan. “Performance of coated and uncoated carbide/cermet cutting tools during turning.” Materials Testing 60, no. 9 (2018): 893-901. | 3 | |||||
| M.Kademli, O.Y. Gulsoy (2013) – Investigation of Using Table Type Air Separators for Coal Cleaning – International Journal of Coal Preparation and Utilization | 11 | |||||
| M.Kademli, O.Y. Gulsoy (2012) – Role of Particle Size and Solid Contents of Feed on Mica – Feldspar Separation in Gravity Concentration | 7 | |||||
| M.Kademli, O.Y. Gulsoy (2016) -Influence Of Partıcle Sıze And Feed Rate On Coal Cleanıng In A Dry Separator – Physicochemical Problems Of Mineral Processing | 3 | |||||
| UZEL MURAT,TOĞAY ABDULLAH,ANIL ÖZGÜR,SÖĞÜTLÜ CEVDET (2018). Experimental investigation of flexural behavior of glulam beams reinforced with different bonding surface materials. Construction and Building Materials, 158, 149-163. (Yayın No: 4281905) | 8 | |||||
| TOĞAY ABDULLAH,DÖNGEL NİHAT,SÖĞÜTLÜ CEVDET,ERGİN EMRE,UZEL MURAT,GÜNEŞ SERKAN (2017). Determination of the Modulus of Elasticity of Wooden Construction Elements Reinforced with Fiberglass Wire Mesh and Aluminum Wire Mesh. BioResources, 12(2), 2466-2478. (Yayın No: 3512302) |
2 | |||||
| The Influence Of Ohmic Back Contacts On The Properties of a-Si:H Schottky Diodes | 11 | |||||
| Steady-State and Transient Photoconductivity in Hydrogenated Amorphous Silicon Nitride Films | 6 | |||||
| Optical Transmission Measurements On Glow-Discharge Amorphous Silicon Nitride Films | 8 | |||||
| The Temperature Dependence Of Dark Conductivity in Hydrogenated Amorphous SiNx Films | 1 | |||||
| BOLAT ÇİMEN CENNET, İPEK AHMET (2017) On Jacobsthal and Jacobsthal-Lucas Octonions, Mediterranean Journal of Mathematics 14 (2), 1-13. | 19 | |||||
| Kalkan, Ö. K., & Kelecioğlu, H. (2016). The effect of sample size on parametric and nonparametric factor analytical methods. Educational Sciences: Theory & Practice, 16(1). | 3 | |||||
| Kaya, E., & Köksal, M. (2016). Investigation of the predicting ability of single-phase chemical equilibrium modeling applied to circulating fluidized bed coal gasification. Journal of Energy Resources Technology, 138(3). | 4 | |||||
| Shuja, S. Z., Yilbas, B. S., Ali, H., & Karatas, C. (2016). Laser pulse heating of steel mixing with WC particles in a irradiated region. Optics & Laser Technology, 86, 126-135. | 9 | |||||
| Yilbas, B. S., Akhtar, S. S., Karatas, C., Ali, H., Boran, K. U. R. T. U. L. U. Ş., Khaled, M., … & Aleem, A. B. J. (2016). Laser treatment of aluminum composite and investigation of thermal stress field. The International Journal of Advanced Manufacturing Technology, 86(9), 3547-3561. | 6 | |||||
| Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2016). Laser machining of different diameter holes in alumina ceramic: Thermal stress analysis. Machining Science and Technology, 20(3), 349-367. | 1 | |||||
| Yilbas, B. S., Akhtar, S. S., Karatas, C., & Boran, K. U. R. T. U. L. U. Ş. (2016). Laser treatment of dual matrix cast iron with presence of WC particles at the surface: influence of self-annealing on stress fields. Optics & Laser Technology, 76, 6-18. | 9 | |||||
| Yilbas, B. S., Patel, F., & Karatas, C. (2015). Laser controlled melting of H12 hot-work tool steel with B4C particles at the surface. Optics & Laser Technology, 74, 36-42. | 4 | |||||
| Yilbas, B. S., Karatas, C. İ. H. A. N., Karakoc, H., Aleem, B. A., Khan, S., & Al-Aqeeli, N. (2015). Laser surface treatment of aluminum based composite mixed with B4C particles. Optics & Laser Technology, 66, 129-137. | 9 | |||||
| Yilbas, B. S., Toor, I., Karatas, C., Malik, J., & Ovali, I. (2015). Laser treatment of dual matrix structured cast iron surface: Corrosion resistance of surface. Optics and Lasers in Engineering, 64, 17-22. | 14 | |||||
| Yilbas, B. S., Matthews, A., Karatas, C., Leyland, A., Khaled, M., Abu-Dheir, N., … & Nie, X. (2014). Laser texturing of plasma electrolytically oxidized aluminum 6061 surfaces for improved hydrophobicity. Journal of Manufacturing Science and Engineering, 136(5). | 16 | |||||
| Yilbas, B. S., & Karatas, C. (2014). Laser treatment of boron carbide surfaces: Metallurgical and morphological examinations. Journal of alloys and compounds, 603, 125-131. | 1 | |||||
| Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2014). Laser cutting of triangular geometry into alumina tiles: Morphological changes and thermal stress analysis. Machining Science and Technology, 18(3), 424-447. | 7 | |||||
| Toor, I. H., Yilbas, B. S., Karatas, C., Hussein, M. A., & Zafar, M. N. (2013). Electrochemical investigation of the effect of different laser surface treatments on Hastelloy G alloy. International journal of materials research, 104(10), 1007-1012. | 1 | |||||
| Yilbas, B. S., Patel, F., & Karatas, C. (2013). Laser controlled melting of HSLA steel surface with presence of B4C particles. Applied Surface Science, 282, 601-606. | 13 | |||||
| Yilbas, B. S., Malik, J., Patel, F., & Karatas, C. (2013). Electrochemical testing of laser treated bronze surface. Journal of alloys and compounds, 563, 180-185. | 1 | |||||
| Yilbas, B. S., Akhtar, S., & Karatas, C. (2013). Laser treatment of Rene-41: thermal and microstructural analysis. Journal of Manufacturing Science and Engineering, 135(3). | 4 | |||||
| Yilbas, B. S., Patel, F., & Karatas, C. (2013). Laser surface treatment of high‐speed tool steel (AISI M2). Surface and interface analysis, 45(6), 1008-1013. | 2 | |||||
| Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2013). Laser nitriding of the surface of phosphor bronze. The International Journal of Advanced Manufacturing Technology, 65(9-12), 1553-1565. | 8 | |||||