SCI-SSCI VE AHCI KAPSAMINDAKİ DERGİLERDE YAYINLANMIŞ MAKALELER

Bilgin, M., Karabulut, Ş. & Özdemir, A. Investigation Of Heat-Assisted Dissimilar Friction Stir Welding Of Aa7075-T6 Aluminum And Az31b Magnesium Alloys. Arab J Sci Eng 45, 1081–1095 (2020). Https://Doi.Org/10.1007/S13369-019-04244-4

Karakoç Halil,Ovalı İsmail,Dündar Sibel,Çıtak Ramazan (2019). Wear And Mechanical Properties Of Al6061/Sic/B4c Hybrid Composites Produced With Powder Metallurgy.  Journal Of Materials Research And Technology-Jmrt, 8(6), 5348-5361., Doi: 10.1016/J.Jmrt.7019.09.007 (Yayın No: 5789705)

Kademli, O.Y. Gulsoy (Early Access) -The Moisture Content Effect On Coal Cleaning Performance Of Dry Separator İn Different Feed Rates – International Journal Of Coal Preparation And Utilization

A. Aydogan, M.Kademli (2020) – Effect Of Operational Conditions On Falcon Concentrator Performance With Different Particle Size Fractions – Particulate Science And Technology

Kademli, N.A. Aydoğan (2019) – An Extraction Of Copper From Recycling Plant Slag By Using Falcon Concentrator – Gospodarka Surowcami Mineralnymi-Mineral Resources Management

Ulas, Hasan Basri, Musa Bilgin, Huseyin Kursad Sezer, And Murat Tolga Ozkan. “Performance Of Coated And Uncoated Carbide/Cermet Cutting Tools During Turning.” Materials Testing 60, No. 9 (2018): 893-901.

Kademli, O.Y. Gulsoy (2016) -Influence Of Partıcle Sıze And Feed Rate On Coal Cleanıng In A Dry Separator – Physicochemical Problems Of Mineral Processing

Sakın Shaımaa,Anıl Özgür,Uzel Murat,Toğay Abdullah (2020). Investigation Of Bond-Slip Model Of Timber-To-Timber Bonded Joint Strengthened With Different Types Of Nets.  Mechanıcs Based Desıgn Of Structures And Machınes(Null), Doi: 10.1080/15397734.2020.1839493 (Yayın No: 6616971)

Uzel Murat,Toğay Abdullah,Anıl Özgür,Söğütlü Cevdet (2018). Experimental İnvestigation Of Flexural Behavior Of Glulam Beams Reinforced With Different Bonding Surface Materials.  Construction And Building Materials, 158, 149-163. (Yayın No: 4281905)

Karakoç, Halil, Şener Karabulut, And Ramazan Çıtak. “Study On Mechanical And Ballistic Performances Of Boron Carbide Reinforced Al 6061 Aluminum Alloy Produced By Powder Metallurgy.” Composites Part B: Engineering 148 (2018): 68-80.

Yılmaz, B., Karabulut, Ş., & Güllü, A. (2018). Performance Analysis Of New External Chip Breaker For Efficient Machining Of Inconel 718 And Optimization Of The Cutting Parameters. Journal Of Manufacturing Processes, 32, 553-563.

Karabulut, Ş., Gökmen, U., & Çinici, H. (2018). Optimization Of Machining Conditions For Surface Quality İn Milling Aa7039-Based Metal Matrix Composites. Arabian Journal For Science And Engineering, 43(3), 1071-1082.

Motorcu, A. R., Çoşkun, S., & Karabulut, Ş. (2018). Effects Of Control Factors On Operating Temperatures Of A Mechanical Heat Pump İn Waste Heat Recovery: Evaluation Using The Taguchi Method.

Karabulut, Ş., & Karakoç, H. (2017). Investigation Of Surface Roughness İn The Milling Of Al7075 And Open-Cell Sic Foam Composite And Optimization Of Machining Parameters. Neural Computing And Applications, 28(2), 313-327.

Toğay Abdullah,Döngel Nihat,Söğütlü Cevdet,Ergin Emre,Uzel Murat,Güneş Serkan (2017). Determination Of The Modulus Of Elasticity Of Wooden Construction Elements Reinforced With Fiberglass Wire Mesh And Aluminum Wire Mesh.  Bioresources, 12(2), 2466-2478. (Yayın No: 3512302)

“Bolat Çimen Cennet, İpek Ahmet (2017) On Jacobsthal And Jacobsthal-Lucas Octonions, Mediterranean Journal Of Mathematics 14 (2), 1-13.”

Kalkan, Ö. K., & Kelecioğlu, H. (2016). The Effect Of Sample Size On Parametric And Nonparametric Factor Analytical Methods. Educational Sciences: Theory & Practice, 16(1)

Uzun Arif,Karakoç Halil,Gökmen Uğur,Çinici Henifi,Türker Mehmet (2016). Investigation Of Mechanical Properties Of Tubular Aluminum Foams.  International Journal Of Materials Research, 107(11), 996-1004., Doi: 10.3139/146.111430 (Yayın No: 3134641)

Erdem Mehmet,Çinici Henifi,Gökmen Uğur,Karakoç Halil,Türker Mehmet (2016). Mechanical And Ballistic Properties Of Powder Metal 7039 Aluminium Alloy Joined By Friction Stir Welding.  Transactions Of Nonferrous Metals Society Of China, 26(1), 74-84., Doi: 10.1016/S1003-6326(16)64090-6 (Yayın No: 3134812)

Kaya, E., & Köksal, M. (2016). Investigation Of The Predicting Ability Of Single-Phase Chemical Equilibrium Modeling Applied To Circulating Fluidized Bed Coal Gasification. Journal Of Energy Resources Technology, 138(3).

Shuja, S. Z., Yilbas, B. S., Ali, H., & Karatas, C. (2016). Laser Pulse Heating Of Steel Mixing With Wc Particles İn A İrradiated Region. Optics & Laser Technology, 86, 126-135.

Yilbas, B. S., Akhtar, S. S., Karatas, C., Ali, H., Boran, K. U. R. T. U. L. U. Ş., Khaled, M., … & Aleem, A. B. J. (2016). Laser Treatment Of Aluminum Composite And İnvestigation Of Thermal Stress Field. The International Journal Of Advanced Manufacturing Technology, 86(9), 3547-3561.

Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2016). Laser Machining Of Different Diameter Holes İn Alumina Ceramic: Thermal Stress Analysis. Machining Science And Technology, 20(3), 349-367.

Yilbas, B. S., Akhtar, S. S., Karatas, C., & Boran, K. U. R. T. U. L. U. Ş. (2016). Laser Treatment Of Dual Matrix Cast İron With Presence Of Wc Particles At The Surface: İnfluence Of Self-Annealing On Stress Fields. Optics & Laser Technology, 76, 6-18.

Karabulut, Ş., Karakoç, H., & Çıtak, R. (2016). Influence Of B4c Particle Reinforcement On Mechanical And Machining Properties Of Al6061/B4c Composites. Composites Part B: Engineering, 101, 87-98.

Karabulut, Ş., Gökmen, U., & Cinici, H. (2016). Study On The Mechanical And Drilling Properties Of Aa7039 Composites Reinforced With Al2o3/B4c/Sic Particles. Composites Part B: Engineering, 93, 43-55.

Karabulut, Ş., Çinici, H., & Karakoç, H. (2016). Experimental İnvestigation And Optimization Of Cutting Force And Tool Wear İn Milling Al7075 And Open-Cell Sic Foam Composite. Arabian Journal For Science And Engineering, 41(5), 1797-1812.

Karabulut, Ş. (2015). Optimization Of Surface Roughness And Cutting Force During Aa7039/Al2o3 Metal Matrix Composites Milling Using Neural Networks And Taguchi Method. Measurement, 66, 139-149.

Yilbas, B. S., Patel, F., & Karatas, C. (2015). Laser Controlled Melting Of H12 Hot-Work Tool Steel With B4c Particles At The Surface. Optics & Laser Technology, 74, 36-42.

Yilbas, B. S., Karatas, C. İ. H. A. N., Karakoc, H., Aleem, B. A., Khan, S., & Al-Aqeeli, N. (2015). Laser Surface Treatment Of Aluminum Based Composite Mixed With B4c Particles. Optics & Laser Technology, 66, 129-137.

Yilbas, B. S., Toor, I., Karatas, C., Malik, J., & Ovali, I. (2015). Laser Treatment Of Dual Matrix Structured Cast İron Surface: Corrosion Resistance Of Surface. Optics And Lasers İn Engineering, 64, 17-22.

Yılbaş Bekir Sami,Karataş Cihan,Karakoç Halil,Aleem Bj Abdul,Khan S,Al-Aqeeli N (2015). Laser Surface Treatment Of Aluminum Based Composite Mixed With B4c Particles.  Optics & Laser Technology, 66, 129-137., Doi: 10.1016/J.Optlastec.2014.08.014 (Yayın No: 2136504)

Çinici Henifi,Gökmen Uğur,Uzun Arif,Karakoç Halil,Göde Ceren,Türker Mehmet (2014). Toz Metalurjisi Yöntemiyle Üretilen Alsi7 köpüklerin Düşük Hızlı Darbe Enerjileri Altındapenetrasyon Davranışının İncelenmesi.  Journal Of The Faculty Of Engineering And Architecture Of Gazi University, 29(2), 395-400. (Yayın No: 2268063) 13.

Ateş Hakan,Gökmen Uğur,Çinici Henifi,Uzun Arif,Karakoç Halil,Türker Mehmet (2014). Joinability Of Particulate Reinforced Alumix 231 Based Composite Materials Produced By Powder Metallurgy Route. Metallofizika İ Noveishie Tekhnologii (Yayın No: 3135801)”

Yilbas, B. S., Matthews, A., Karatas, C., Leyland, A., Khaled, M., Abu-Dheir, N., … & Nie, X. (2014). Laser Texturing Of Plasma Electrolytically Oxidized Aluminum 6061 Surfaces For İmproved Hydrophobicity. Journal Of Manufacturing Science And Engineering, 136(5).

Yilbas, B. S., & Karatas, C. (2014). Laser Treatment Of Boron Carbide Surfaces: Metallurgical And Morphological Examinations. Journal Of Alloys And Compounds, 603, 125-131.

Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2014). Laser Cutting Of Triangular Geometry İnto Alumina Tiles: Morphological Changes And Thermal Stress Analysis. Machining Science And Technology, 18(3), 424-447

Toor, I. H., Yilbas, B. S., Karatas, C., Hussein, M. A., & Zafar, M. N. (2013). Electrochemical İnvestigation Of The Effect Of Different Laser Surface Treatments On Hastelloy G Alloy. International Journal Of Materials Research, 104(10), 1007-1012.

Yilbas, B. S., Patel, F., & Karatas, C. (2013). Laser Controlled Melting Of Hsla Steel Surface With Presence Of B4c Particles. Applied Surface Science, 282, 601-606.

Yilbas, B. S., Malik, J., Patel, F., & Karatas, C. (2013). Electrochemical Testing Of Laser Treated Bronze Surface. Journal Of Alloys And Compounds, 563, 180-185.

Yilbas, B. S., Akhtar, S., & Karatas, C. (2013). Laser Treatment Of Rene-41: Thermal And Microstructural Analysis. Journal Of Manufacturing Science And Engineering, 135(3).

Yilbas, B. S., Patel, F., & Karatas, C. (2013). Laser Surface Treatment Of High‐Speed Tool Steel (Aısı M2). Surface And İnterface Analysis, 45(6), 1008-1013.

Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2013). Laser Nitriding Of The Surface Of Phosphor Bronze. The International Journal Of Advanced Manufacturing Technology, 65(9-12), 1553-1565.

Kademli (2013) – Comparison Of Sub-Sieving Techniques Based On The Relation Of Particle Size And Specific Surface Area İn Mineral Processing – Particulate Science And Technology 

Kademli, O.Y. Gulsoy (2013) – Investigation Of Using Table Type Air Separators For Coal Cleaning – International Journal Of Coal Preparation And Utilization

Karabulut, Ş., & Güllü, A. (2013). Farklı Yanaşma Açıları İle Vermiküler Grafitli Dökme Demirin Frezelenmesinde Kesme Kuvvetlerinin Araştırılması Ve Analitik Modellenmesi. Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 28(1).

Karabulut, Ş. E. N. E. R., & Gullu, A. (2013). An İnvestigation Of Cutting Forces And Analytical Modelling İn Milling Compacted Graphite İron With Different Lead Angles.

Kademli, O.Y. Gulsoy (2012) – Role Of Particle Size And Solid Contents Of Feed On Mica – Feldspar Separation İn Gravity Concentration

Gullu, A., Karabulut, Ş. E. N. E. R., & Guldas, A. (2008). Chip Breaking Problems İn Machining Of Inconel 718 Super Alloy And Chip Breaker Design.

Güllü, A., & Karabulut, Ş. (2008). Dynamic Chip Breaker Design For Inconel 718 Using Positive Angle Tool Holder. Materials And Manufacturing Processes, 23(8), 852-857.