SCI, SCI-EXPANDED, SSCI VE AHCI TARAFINDAN TARANAN 44 YAYIN VE ATIF SAYILARI

Makale Künyesi

M Bilgin, Ş Karabulut, A Özdemir, Investigation of Heat-Assisted Dissimilar Friction Stir Welding of AA7075-T6 Aluminum and AZ31B Magnesium Alloys Arabian Journal for Science and Engineering 45 (2), 1081-1095

B Yılmaz, Ş Karabulut, A Güllü, A review of the chip breaking methods for continuous chips in turning Journal of Manufacturing Processes 49, 50-69

H Karakoç, Ş Karabulut, R Çıtak, Study on mechanical and ballistic performances of boron carbide reinforced Al 6061 aluminum alloy produced by powder metallurgy, Composites Part B: Engineering 148, 68-80

B Yılmaz, Ş Karabulut, A Güllü, Performance analysis of new external chip breaker for efficient machining of Inconel 718 and optimization of the cutting parameters Journal of Manufacturing Processes 32, 553-563

Ş Karabulut, U Gökmen, H Çinici, Optimization of machining conditions for surface quality in milling AA7039-based metal matrix composites Arabian Journal for Science and Engineering 43 (3), 1071-1082

AR Motorcu, S Çoşkun, Ş Karabulut, Effects of control factors on operating temperatures of a mechanical heat pump in waste heat recovery: Evaluation using the Taguchi method Vinca Inst Nuclear Sci

Ş Karabulut, H Karakoç, Investigation of surface roughness in the milling of Al7075 and open-cell SiC foam composite and optimization of machining parameters Neural Computing and Applications 28 (2), 313-327

A Şahinoğlu, Ş Karabulut, A Güllü, Study on spindle vibration and surface finish in turning of Al 7075, Solid State Phenomena 261, 321-327

Ş Karabulut, H Karakoç, R Çıtak, Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites Composites Part B: Engineering 101, 87-98

S Karabulut, Study on machining parameters for thrust force and torque in milling aa7039 composites reinforced with al2o3/b4c/sic particles, International Journal of Engineering Technologies 2 (2), 68-75

Ş Karabulut, U Gökmen, H Cinici, Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O3/B4C/SiC particles Composites Part B: Engineering 93, 43-55

Ş Karabulut, H Çinici, H Karakoç, Experimental investigation and optimization of cutting force and tool wear in milling Al7075 and open-cell SiC foam composite Arabian Journal for Science and Engineering 41 (5), 1797-1812

Taguchi method, Ş Karabulut, Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and  Measurement 66, 139-149

A Güllü, Ş Karabulut,, Dynamic chip breaker design for Inconel 718 using positive angle tool holder  Materials and Manufacturing Processes 23 (8), 852-857

Ozakan, M.T., ULAŞ, H.B., BİLGİN, M. Experimental design and artificial neural network model for turning the 50CrV4 (SAE 6150) alloy using coated carbide/cermet cutting tools. Mater. Technol.48, 227–236 (2014)

Ulas, Hasan Basri, Musa Bilgin, Huseyin Kursad Sezer, and Murat Tolga Ozkan. "Performance of coated and uncoated carbide/cermet cutting tools during turning." Materials Testing 60, no. 9 (2018): 893-901.

M.Kademli, O.Y. Gulsoy (2013) - Investigation of Using Table Type Air Separators for Coal Cleaning - International Journal of Coal Preparation and Utilization

M.Kademli, O.Y. Gulsoy (2012) - Role of Particle Size and Solid Contents of Feed on Mica – Feldspar Separation in Gravity Concentration 

M.Kademli, O.Y. Gulsoy (2016) -Influence Of Partıcle Sıze And Feed Rate On Coal Cleanıng In A Dry Separator - Physicochemical Problems Of Mineral Processing 

UZEL MURAT,TOĞAY ABDULLAH,ANIL ÖZGÜR,SÖĞÜTLÜ CEVDET (2018).  Experimental investigation of flexural behavior of glulam beams reinforced with different bonding surface materials.  Construction and Building Materials, 158, 149-163. (Yayın No: 4281905)

TOĞAY ABDULLAH,DÖNGEL NİHAT,SÖĞÜTLÜ CEVDET,ERGİN EMRE,UZEL MURAT,GÜNEŞ SERKAN (2017).  Determination of the Modulus of Elasticity of Wooden Construction Elements Reinforced
with Fiberglass Wire Mesh and Aluminum Wire Mesh.  BioResources, 12(2), 2466-2478. (Yayın No: 3512302)

The Influence Of Ohmic Back Contacts On The Properties of a-Si:H Schottky Diodes

Steady-State and Transient Photoconductivity in Hydrogenated Amorphous Silicon Nitride Films  

Optical Transmission Measurements On Glow-Discharge Amorphous Silicon Nitride Films

The Temperature Dependence Of Dark Conductivity in Hydrogenated Amorphous SiNx Films

BOLAT ÇİMEN CENNET, İPEK AHMET (2017) On Jacobsthal and Jacobsthal-Lucas Octonions,  Mediterranean Journal of Mathematics 14 (2), 1-13.

Kalkan, Ö. K., & Kelecioğlu, H. (2016). The effect of sample size on parametric and nonparametric factor analytical methods. Educational Sciences: Theory & Practice, 16(1).

Kaya, E., & Köksal, M. (2016). Investigation of the predicting ability of single-phase chemical equilibrium modeling applied to circulating fluidized bed coal gasification. Journal of Energy Resources Technology, 138(3).

Shuja, S. Z., Yilbas, B. S., Ali, H., & Karatas, C. (2016). Laser pulse heating of steel mixing with WC particles in a irradiated region. Optics & Laser Technology, 86, 126-135.

Yilbas, B. S., Akhtar, S. S., Karatas, C., Ali, H., Boran, K. U. R. T. U. L. U. Ş., Khaled, M., ... & Aleem, A. B. J. (2016). Laser treatment of aluminum composite and investigation of thermal stress field. The International Journal of Advanced Manufacturing Technology, 86(9), 3547-3561.

Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2016). Laser machining of different diameter holes in alumina ceramic: Thermal stress analysis. Machining Science and Technology, 20(3), 349-367.

Yilbas, B. S., Akhtar, S. S., Karatas, C., & Boran, K. U. R. T. U. L. U. Ş. (2016). Laser treatment of dual matrix cast iron with presence of WC particles at the surface: influence of self-annealing on stress fields. Optics & Laser Technology, 76, 6-18.

Yilbas, B. S., Patel, F., & Karatas, C. (2015). Laser controlled melting of H12 hot-work tool steel with B4C particles at the surface. Optics & Laser Technology, 74, 36-42.

Yilbas, B. S., Karatas, C. İ. H. A. N., Karakoc, H., Aleem, B. A., Khan, S., & Al-Aqeeli, N. (2015). Laser surface treatment of aluminum based composite mixed with B4C particles. Optics & Laser Technology, 66, 129-137.

Yilbas, B. S., Toor, I., Karatas, C., Malik, J., & Ovali, I. (2015). Laser treatment of dual matrix structured cast iron surface: Corrosion resistance of surface. Optics and Lasers in Engineering, 64, 17-22.

Yilbas, B. S., Matthews, A., Karatas, C., Leyland, A., Khaled, M., Abu-Dheir, N., ... & Nie, X. (2014). Laser texturing of plasma electrolytically oxidized aluminum 6061 surfaces for improved hydrophobicity. Journal of Manufacturing Science and Engineering, 136(5).

Yilbas, B. S., & Karatas, C. (2014). Laser treatment of boron carbide surfaces: Metallurgical and morphological examinations. Journal of alloys and compounds, 603, 125-131.

Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2014). Laser cutting of triangular geometry into alumina tiles: Morphological changes and thermal stress analysis. Machining Science and Technology, 18(3), 424-447.

Toor, I. H., Yilbas, B. S., Karatas, C., Hussein, M. A., & Zafar, M. N. (2013). Electrochemical investigation of the effect of different laser surface treatments on Hastelloy G alloy. International journal of materials research, 104(10), 1007-1012.

Yilbas, B. S., Patel, F., & Karatas, C. (2013). Laser controlled melting of HSLA steel surface with presence of B4C particles. Applied Surface Science, 282, 601-606.

Yilbas, B. S., Malik, J., Patel, F., & Karatas, C. (2013). Electrochemical testing of laser treated bronze surface. Journal of alloys and compounds, 563, 180-185.

Yilbas, B. S., Akhtar, S., & Karatas, C. (2013). Laser treatment of Rene-41: thermal and microstructural analysis. Journal of Manufacturing Science and Engineering, 135(3).

Yilbas, B. S., Patel, F., & Karatas, C. (2013). Laser surface treatment of high‐speed tool steel (AISI M2). Surface and interface analysis, 45(6), 1008-1013.

Yilbas, B. S., Akhtar, S. S., & Karatas, C. (2013). Laser nitriding of the surface of phosphor bronze. The International Journal of Advanced Manufacturing Technology, 65(9-12), 1553-1565.